One of the main special functions of Foxwell GT60 Plus is SAS calibration. It can let you perform calibration of the Steering Angle Sensor, on successful calibration of the sensor and its fault memory is automatically cleared. Check the guide to do SAS calibration on 2014 Range Rover Evoque using this Foxwell diagnostic tool.
Something about Steering Angle Reset:
1.To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.
2.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), peforming four-wheel alignment, or recovering car body, you must reset the steering angle.
Step-by-step guide to do SAS calibration:
1.Connect GT60 Plus to the vehicle via main diagnostic cable properly, and then turn on the tablet.
2.Go to “Maintenance” function-> “SAS”
3.Read the instruction of SAS and tap “Start”
4.Select car region, brand, model and year: Europe-> LAND ROVER-> RANGE ROVER EVOQUE-> 2012-2014
5.Select “ABS Steering angle sensor calibration”
6.Then follow the on-screen instructions to do:
- Turn on ignition switch on
- Set ignition switch to ON (position 2)
- In progress- calibrate steering angle centre position, make sure that the steering wheel is in the central position and that the front wheels are in the straight forward position, press “OK” to continue
- Complete!
- Set ignition switch to OFF (position 0)
- Set ignition switch to ON (position 2)
- The next procedure will be to carry out a complete vehicle diagnostic trouble code clear, click “Yes” to continue
- Wait about 40s to load data
- Set ignition switch to OFF (position 0) again
- Set ignition switch to ON (position 2) again
Now, SAS calibration is done by GT60 Plus diagnostic platform.
Finally, turn off the ignition switch off.
Device used:
FOXWELL GT60 Plus Premier Diagnostic Platform: https://www.obdiitool.co.uk/wholesale/foxwell-gt60-plus-premier-diagnostic-tool.html
Read more:
Foxwell NT510 Elite vs. NT650 Elite vs NT301 vs. GT60 PLUS
FOXWELL GT60 Plus Problems and Solutions
Foxwell NT530/ GT60 Plus Reset (Re-sync) DME/EWS for Fixing BMW Code 2F44
