4 Steps to Program VW CC 2014 Key by Xtool X-100 PAD2 Pro
Car Diagnostic Tool / March 11, 2020

Xtool X-100 PAD2 Pro full version adds VW 4th & 5th IMMO. This post comes with the guide to use it to add new key to VW CC 2014 by PIN code.   Preparation: Xtool X-100 PAD2 Pro full Configuration (€813.64 free shipping from UK) http://www.obdiitool.co.uk/wholesale/xtool-x100-pad2-pro-full-version.html   This is comfort control module EEPROM chip of VW CC 2014 Reading EEPROM chip   Prepare two keys: Original one+ blank one Test two key first The original key can remote and start the car The blank key cannot work   Main 4 steps to program key: Step 1: Get pin code Step 2: Generate 48 dealer key Step 3: Match new key Step 4: Program remote   In detail…   Step 1: Get pin code Connect X100 PAD2 PRO with KC100 to the vehicle Insert the original key into ignition Press X100 PAD2 on the device Select Immobilization-> VW-> 4th& 5th Immobilizer system、 Turn on ignition switch Select 4th immobilizer system-> VW Passat/CC (Recommend) -> Get PIN/CS Follow the prompt to select EEPROM data Codes will be extracted from EEPROM chip dump file   Step 2: Generate 48 dealer key Select Generate 48 dealers key to activate KC100 adapter Then input CS…