How to Refresh BMW F Series 6HP EGS with Yanhua Mini ACDP?
Car Key Programmer / September 8, 2021

Yanhua Mini ACDP BMW + Module 11 can support to refresh BMW F series 6HP EGS on bench without soldering, this is a guide to show the operation process.   Procedure   Installation Preparation Prepare parts: ACDP, OBP+ICP adapter, EGS interface board & EGS module.   Connect EGS interface board & EGS module: Aim the 6HP end label point on interface board with the EGS interface label point during installation.   Short the jumper cap to the “CAN-R-Join”, connect all parts together. Refresh BMW 6HP EGS Open Mini ACDP app, click BMW >> EGS refresh >> 6HP data refresh(supports F chassis) >> Data refresh >> OK   Check info, click “Continue” It starts reading data…   OK >> Save >> OK Data file saved success. Read data is completed.   Click “Continue” to start write data.   Note: Start writing data. It is forbidden to unplug the ACDP and keep steady power supply to ACDP during the process! If the device disconnect, please unplug the ACDP after disconnection 15 mins, the ACDP will automatically complete the writing! Click “OK” to continue. It is writing data, please wait…   Data refresh is completed. It’ll show the backup path automatically. Done!  …

无觅相关文章插件,快速提升流量