Lonsdor Super ADP 8A/4A Adapter is newly designed for the new TOYOTA/Lexus (2017-2021) smart key programming without PIN. 93C66 model, new TOYOTA/LEXUS 0410/0440 (2018-2021), and Toyata 4A chip such as Corolla, Levin also can add key& do all keys lost by using it and Lonsdor K518.
1.Lonsdor Super ADP 8A/4A Adapter function
Support 90% Toyota Lexus (up to 2021) proximity smart key programming without PIN. The ADP adapter works without Toyota AKL license.
8A: DST-AES 88 A8 A9 AA
4A: HITAG-AES
The specific functions:
- Backup IMMO data
- Add key via OBD
- All keys lost
- Delete key
- Cannot be used alone. Works with Lonsdor K518ISE/K518S
- Free password to program dealer key & Lonsdor FT dedicated key
2.How to use ADP 8A/4A Adapter with K518?
Locate the smart box and connect the 8A/4A adapter cable
Lexus ES260 smart box location:
Under the passenger-seat compartment
Lexus LS500 smart box location:
Under the left-hand side of the driver’s seat
Here takes LEXUS es260 and Lonsdor K518 Pro (CN) as an example.
Step 1: Backup IMMO data
Click Backup IMMO data
Connect Lonsdor ADP 8A/4A Adapter to K518 programmer main cable interface
Connect smart box and ADP adapter to smart box via the professional harness
Connect ADP adapter to the OBD port of vehicle
Make sure K518 key programmer WiFi connection is good
Then read the software Number
Save the data with new file name
Remember the file name, and it will be used in key adding and deleting.
Step 2: Generate emulator key (8A/4A)
AKL requires LKE emulator key, add key does not.
1.Generate emulator key (AKL)
Network connection is required. Make sure the connection is normal
Select the file has just been saved
Plug the LKE emulator to the host port of the Lonsdor K518
Wait a moment to generate key
Generate emulator key successfully, then use the key to turn on ignition switch, and enter the key matching function to add new key
Use the top of the emulator key to press the start button twice
Start the car successfully
2.Add smart key
Make sure the network connection is normal and the original smart box has connected to the vehicle
Use a registered original key or emulator key to add new key
Turn the ignition switch on
Read out the software number
Turn off the ignition switch, and open the dual flashing lights
Select ‘Load the smart box DFlash file to get 12-bit PIN code’
Select the file has been backed up
Detect out the registered key number is 2, and the key can be registered is 5.
Finish the following operation within 30s
- Put the back of the registered key or generated emulator key on the Start button, when the buzzer beeps one time, remove the smart key or emulator key
- Put the back of the smart key that needs registration on the Start button, when the buzzer beeps twice, remove the smart key
Match successfully
Now the registered key number is 3, and the key can be registered is 4.
Finally, put the back of the smart key that has just registered on the Start button, the buzzer beeps.
Programming is completed
Finally, turn off the ignition switch and dual flashing lights
Check if the programmed key can use normally or not
OK, it works fine!
Lonsdor ADP 8A/4A adapter delete smart key:
Note: This function is used to remove all keys that are not present.
The keys that do not touch the start button will be removed and cannot be registered again.
Turn the ignition switch on
Read out the software number
Turn off the ignition switch, and turn on the dual flashing lights
Select ‘Load the smart box DFlash file to get 12-bit PIN code’
Select the data has backed up
Put the key to be kept near the start button, beeps one time
Remove the keys that need to be deleted from the car
Key deleting is successful. Now the registered key number is 2.
Where to buy Lonsdor Super ADP 8A/4A Adapter?
Here you can go:
https://www.obdiitool.co.uk/wholesale/lonsdor-super-adp-8a4a-adapter.html
