Ford VCMII Firmware Update “Error Starting the VCI Reprogramming Process” Solution

June 28, 2021

One customer tried to update his Ford VCMII (Item No. SP177-2) firmware on his Panasonic CF-53, but he got the error message “Error starting the VCI reprogramming process” as below. He didn’t know how to do and ask for our customer service for help.

Ford Vcm2 Firmware Update Error Solution 1

 

Here is the suggestion offered by obdiitool.co.uk engineer.

It needs to recover firstly, and then start to update.

Please refer to the steps as follows to do.

1.Connect VCM2 clone to the computer via USB cable

Ford Vcm2 Firmware Update Error Solution 2

2.Go to computer-> manage-> Device Manager to check the Network adapters (it’s ETAS VCI USB RNDIS Device)

Ford Vcm2 Firmware Update Error Solution 3

3.Select All programs-> Bosch-> VCI Software (Ford- VCM-II)-> VCI Manager (Ford-VCM-II)

Ford Vcm2 Firmware Update Error Solution 4

4.Click “Recover”, and click “Start Update”

Ford Vcm2 Firmware Update Error Solution 5

Ford Vcm2 Firmware Update Error Solution 6

Note: Do not unplug the VCM II from the PC or remove power from the VCMII during the update process.

5.Wait a moment until the process is done. And the VCMII will automatically restart. Wait until you hear the “beep”, then the VCM II is ready for use.

Ford Vcm2 Firmware Update Error Solution 7

At the same time, you can see the corresponding indicators are on.

Ford Vcm2 Firmware Update Error Solution 8

 

For any question, please contact us at:

www.obdiitool.co.uk



无觅相关文章插件,快速提升流量