How-to: read VAG SIEMENS SIMOS 5WS4PPD1. 5 with Ktag using BDM probe.
Device required:
ktag firmware 7.020 software 2.23 or above
Preparation:
BASIC CONNECTION – PINOUT FOR SIEMENS PPD 1.X ECU, USED IN VAG CARS
6 : +12V ( term.15 )
2 : GND ( term. 31 )
18 : +12V ( term. 30 )
72 : K Line
89 : CAN High
66 : CAN Low
2 : GND ( term. 31 )
18 : +12V ( term. 30 )
72 : K Line
89 : CAN High
66 : CAN Low
Procedure:
Step 1: Set up BDM connection
connect ecu with BDM frame follow the wiring diagram
Step 2: Read PPD 1.5 with ktag 7.020
Open Ktag ksuite 2.23 software
Select protocol SIEMENS SIMOS 5WS4PPD1. xVAG
Select Plug-in
Read and backup ecu data
Reading in process, wait until complete
Reading eeprom successfully.
Save ecu data.
Done.
Note: BDM100, kess v2 and Fgtech galletto v54 reads PPD1. as well.
Report:
passat 140hp bkp engine with ppd.1.5 ecu and kess v2 reads it fine.
i haven’t wrote to it but read the ecu no problem
