Xhorse VVDI Key Tool Plus Pad supports IMMO programming for Benz, BMW, Audi, VW and common car brands – Toyota, Honda, Mazda, Ford, etc. Here will share a newest test report about Keytool Plus successfully programs smart key to Mazda CX5 2020 (ID 49, 433 MHZ).
Let’s see the test in detail.
Have tested the working key can start the car normally, and the new key cannot start.
Connect Key Tool Plus to the vehicle via main cable properly and turn on ignition
Go to “Immo Programming” -> “Mazda”-> “CX-5” -> “2017- ” and click “Begin”
Select “add a key”
Make sure the ignition has been turned on
Confirm the current number of smart keys is 2 and continue
Start to read the password, after a moment, read password successfully.
Then continue to match
It takes about 7 minutes to configure the system, just wait… until the horn to sound.
Step on brakes when automatic- shift, step on the clutch when manual-shift, and keep the maker end of the smart key close to the start button
OK, match the key successfully! The current number of smart keys is 3.
Then complete the steps on the screen after programming:
- Switch ignition off, then step on brakes, click the start button by the smart key to be added to start the engine for 3 seconds, then switch ignition off
After the process is done, use the working and new key programmed by Xhorse Key Tool Plus to start the car, both work! Awesome!
Besides Mazda, VVDI Key Tool Plus Pad also works well with Audi, Benz, BMW, Chrysler, Honda, Hyundai, Land Rover, Toyota, VW, etc. Read more in the following post.
Xhorse VVDI Key Tool Plus Feedback & Test Report