Solved! wiTech MicroPod 2 cannot register on 2016 Chrysler 200

Customer Problem:

I have a 2016 Chrysler 200. I used the wiTECH2 Micropod 2 interface to diagnose my car.  Firstly I connected the Micropod 2 to vehicle, the read indicator is on, and then I connected to laptop to run the software. I remember the network connection well. But when I tried to register, a message appeared on the screen “Registration is needed
Device with serial number*** is not registered. Please check the knowledge
base to determine how to register a device”. How to solve?

Witech Micropod 2 Chrysler Registration Error 1

 

Obdiitool.co.uk engineer solution:

Right click wiTech Diagnostic Application-> Properties-> Open file location

Witech Micropod 2 Chrysler Registration Error 2

Go to C:/Program Files (x86)/DCC Tools/wiTECH/client

Right click “app-config” text file and select “Edit”

Witech Micropod 2 Chrysler Registration Error 3

Change the first number to any one digit you like

i.e change 5 to 6

Then save the text file (Very important!)

Witech Micropod 2 Chrysler Registration Error 4

Witech Micropod 2 Chrysler Registration Error 5

Run Micropod 2 software Witech 17.04.27 again

If witech still prompts error” an internal registration error has occurred “, just ignore by clicking no icon to close it.

Witech Micropod 2 Chrysler Registration Error 6

Tick off the “working offline” on the bottom left corner (Don’t need to login)

Then click “Done”

Witech Micropod 2 Chrysler Registration Error 7

Customer feedback:

Problem solved, diagnose 2016 Chrysler 200 successfully

Witech Micropod 2 Chrysler Registration Error 8

Video guide: