WiTech MicroPod 2 WiFi Connection Set Up Guide

Some users gave feedback that they cannot connect WiFi successfully when they use WiTech MicroPod 2 V17.04.27 auto diagnostic tool for their Chrysler, Dodge, Jeep or Fiat. For this problem, obdiitool.co.uk engineer makes a video of wifi setup.

 

wiTECH software v17.04.27 for MicroPod 2 Free Download (Windows 7 recommended)

https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg

Network connection is needed when running software!!!
First connect MicroPod II to vehicle, if the red indicator turns on, then connect it to laptop via USB cable.
Witech Micropod 2 Wifi Connection Set Up 1

Connect one available wireless WIFI on the computer.

Visit http://172.22.22.22/

Select “Wireless Settings”

Profile: select default, and it will show the related security settings, click “Save”

Witech Micropod 2 Wifi Connection Set Up 2

Witech Micropod 2 Wifi Connection Set Up 3

Then select “Manage Networks”

After performing an action, tick “wireless” and click “Select & Start”

Once the connection is complete you will see an IP address populate for the wireless interface

When it prompts “Success”, go to close the page

Witech Micropod 2 Wifi Connection Set Up 4

Witech Micropod 2 Wifi Connection Set Up 5

Click “Manage Networks” again, and you can see “Currently Selected” and the enabled wireless IP, which means the wireless connection is set successfully.

Witech Micropod 2 Wifi Connection Set Up 6

Watch the video to understand easier.

https://www.youtube.com/watch?v=YAuKmYObGO0