Xhorse Toyota 8A All Key Lost Adapter User Manual 

May 11, 2020

This post comes with the user manual of Xhorse Toyota 8A Non-smart key all keys lost adapter.

Part 1: Xhorse Toyota 8A All Key Lost adapter function
Part 2: Xhorse Toyota 8A All Key Lost adapter vehicle coverage
Part 3: Xhorse Toyota 8A all keys lost adapter how to use
Part 4: Xhorse Toyota 8A all keys lost adapter FAQs

In detail…

Part 1: Xhorse Toyota 8A All Key Lost adapter function

Xhorse Toyota 8A Non-smart key adapter for all keys lost, works well with VVDI2, VVDI Key Tool Max& Mini OBD tool without dismantling the IMMO box.

Xhorse Toyota 8a Akl Adapter User Manual 1

Note: the Toyota 8A adapter cannot be used alone, needs to work with VVDI2 or key tool max.

Part 2: Xhorse Toyota 8A All Key Lost adapter vehicle coverage

Xhorse Toyota 8A Non-smart key adapter supports Toyota 8A H chip (non-smart) all keys lost from year 2014 to 2019 via OBD, without disassembling Immobilizer box, incl. Levin, Corolla, Rav4, Prado, Land Cruiser, Camry, Highlander, Reiz and Sienna.

Part 3: Xhorse Toyota 8A all keys lost adapter how to use

Here is the full package including platform adapter, OBD connector and harness adapter.

Xhorse Toyota 8a Akl Adapter User Manual 2

Platform adapter with harness adapter can be directly connected to the transfer box to add key on the platform, as well as reset the anti-theft box.

Xhorse Toyota 8a Akl Adapter User Manual 3

If we operate in the car, work on bench without disassembling it. It doesn’t need to remove the anti-theft box. We need to connect platform adapter with OBD connector. OBD connector with car OBD

The positive and negative red and black clips of the battery to the positive and negative

Xhorse Toyota 8a Akl Adapter User Manual 4

 

The blue short connector is clamped on the car’s ignition switch No.2 relay

Xhorse Toyota 8a Akl Adapter User Manual 5

 

OBD connector connected to the car

The long blue connector is connected to the ignition switch contact switch plug on

Xhorse Toyota 8a Akl Adapter User Manual 6

 

This specific operations and connections are opened below.

1.Preparation:

Step 1: Find the fuse box on the car and open it

Note: Different models have different fuse positions and relay box positions

Xhorse Toyota 8a Akl Adapter User Manual 7

Look for the No.2 ignition switch according to the position on the fuse box

Xhorse Toyota 8a Akl Adapter User Manual 8

Xhorse Toyota 8a Akl Adapter User Manual 9

 

And unplug the relay

Xhorse Toyota 8a Akl Adapter User Manual 10

Step 2: Remove the protective shell
Exposing the ignition lock
There is an inductive contact switch line on the ignition lock, unplug it

Xhorse Toyota 8a Akl Adapter User Manual 11

There is a two-pin cable on this plug. After a while, you need to insert the long blue plug on it.

Xhorse Toyota 8a Akl Adapter User Manual 12

The preparatory work has been completed
2.Connection:
This OBD is connected to the device

Xhorse Toyota 8a Akl Adapter User Manual 13

This OBD connect with the car

Xhorse Toyota 8a Akl Adapter User Manual 14

 

Two power clips are clamped on the battery

Xhorse Toyota 8a Akl Adapter User Manual 15

Make sure take away the red positive electrode

Xhorse Toyota 8a Akl Adapter User Manual 16

 

The positive and negative poles are champed in the corresponding positions

The blue short is connected to the position of the No.2 ignition switch relay

Xhorse Toyota 8a Akl Adapter User Manual 17

OBD port connect with the car

Xhorse Toyota 8a Akl Adapter User Manual 18

This is connected to VVDI2 or Key tool Max

Xhorse Toyota 8a Akl Adapter User Manual 19

Connect the long blue signal wire to the contact switch wire

Xhorse Toyota 8a Akl Adapter User Manual 20

Then connect the 8A adapter to VVDI2 key programmer

Xhorse Toyota 8a Akl Adapter User Manual 21

 

Insert the key without the chip into the ignition switch

Punch it

Xhorse Toyota 8a Akl Adapter User Manual 22

 

Put the super chip into VVDI2 coil

Xhorse Toyota 8a Akl Adapter User Manual 23

 

3.Run VVDI2 software
Enter the VVDI2 software transponder programmer
Click “OBD Make master key directly”

Xhorse Toyota 8a Akl Adapter User Manual 24

 

When communicating, the system dashboard will automatically light up
Reading anti-theft…
The instrument light on the car will flash
Follow the prompt to put the super chip into the VVDI2 antenna and click OK

Xhorse Toyota 8a Akl Adapter User Manual 25

 

If have already put it in, just click OK to continue
Writing to chip
Note: It needs to calculate online, so you need to connect to the Internet when operating.
Generate the master key chip successfully

Xhorse Toyota 8a Akl Adapter User Manual 26

 

Disconnect the thread and recover the vehicle removing
Put the chip into the key
Then insert the key into ignition switch to turn on, start normally

Xhorse Toyota 8a Akl Adapter User Manual 27
Part 4: Xhorse Toyota 8A all keys lost adapter FAQs
Q1: What tool can be used to this connector to car key programmer?
A1: VVDI2 or Key Tool Max+ Mini OBD Tool.
Q2: Toyota 8A Non-smart Key Adapter can work with VVDI2. Are there any requirements for the license of Xhorse VVDI2? Can the VVDI2 basic version also be used?
A2: It doesn’t need any token or authorization. The basic version is also supported.
Q3: Even without vvdi2 i can use it with mini obd tool?
A3: Yes.
Q4:  What years would this work on?
A4: It works on all years.
Q5: Toyota Aygo 2015 System H all keys lost. Does this computer program the chip? Hilux? Hiace?
A5: Yes, it does. No problem for Toyota Hiace and Hilux (2015-2019 IMMO box)
Q6: What kinds of key can be supported? Proximity or just keyed?
A6: Not smart key. Just key.
Q7: What versions of modules IMMO H supports? 
A7:  IMMO box F3-F4-K6-S6
Q8: Is this used to program toyota H immo box on bench?
A8: Not on bench. On car via obd, no need to dismantle the dash anymore. With vvdi2 new software + key tool max, you can read immo data and make keys directly to IMMO or other option is barracuda and tango on bench.
With this set must be on car because there is a connection to fuse box and obd and ign coil.
Q9: Possible to program smart key Land cruiser after 2016?
A9: Yes, it will.
Q10: Does this need a subscription for Toyota or is this a bypass?
A10: Bypass.
Q11: Does it support new 2020 Toyota keys?
A11: Yes.
Q12: Does a programmer of the degree need hello besides this adapter?
A12: The adapter cannot be used alone. It should be work with vvdi2 or key tool max+ mini obd tool.
Q13: Can it be used simultaneously with a barracuda?
A13: No. Barracuda is a ecu programmer. The adapter requires a OBD programmer to program key.
Get XHORSE Toyota 8A Non-smart Key Adapter for All Key Lost No Disassembly:
http://www.obdiitool.co.uk/wholesale/xhorse-toyota-8a-adapter.html