Here share a new XTOOL emulator which works for Toyota/ Lexus smart key when all keys lost. That’s XTOOL KS-01.
What’s the function or feature of KS-01 simulator?
1.XTOOL KS-01 supports generation, copy and simulator of key chip.
2.The simulator card firmware can be updated with KC100.
3.Staus indicator lamp of KS-01:
Turn on and light up for 2s and then extinguish
When writing or reading data, it will flash 0.5s/time
4.The KS-01 simulation card can be reused. After matching the key, turn off the power or remove the battery to restore the initial state.
When to use XTOOL KS-01 key smart card?
Once all the Toyota or Lexus keys are lost, the smart box and other modules in the car need to be disassembled, and then turn on the ignition switch, so that the smart key can be removed and added, and the operation is tedious.
Xtool KS – 01, the five- in- one simulation card can eliminate the need to disassemble the smart box and other modules. As long as the original car data is read from the OBD to generate the simulation card, the ignition switch can be turned on to realize the function of clearing and adding the smart key.
The free disassembly for all keys lost requires an original car key. By reading and decrypting the original car anti-theft data, writing the data to the simulation card is equivalent to generating an original car key. Then you can follow the key addition process.
Which equipments does KS-01 work with?
KS-01 works with XTOOL X100 PAD3/X100 PAD2/H6 Pro/H6 Elite.
Which types does KS-01 support?
XTOOL KS-01 supports Toyota 94 / D4, 98, 39, 88 / A8, A9 type smart keys all key lost programming.
These key types have been tested:
| Vehicle | Year | Key Type | Support or not | Remarks |
| RAV4 | 2015 | 88 | Yes | |
| Alphard | 2013 | 94 | Yes | |
| Alphard | 2015 | A9 | Yes | |
| Previa | 2008 | 94 | Yes | |
| Crown | 2010 | 98 | Yes | |
| Crown | 2015 | A9 | Yes | |
| Crown | 2016 | A8 | Yes | After 2016, Toyota crown is not supported TANGO, K518 even rival products are not supported |
| Prado | 2011 | 98 | Yes | |
| Previa | 2013 | 94 | Yes | |
| Reiz | 2011 | 98 | Yes | |
| Innova | 39 | Yes | The car is being tested for the Indian Tango |
How to use XTOOL KS-01 simulator to program Toyota all keys lost?
Device:
XTOOL X100 PAD2 PRO or X100 PAD3 or H6 Pro or H6 Elite
KS-01 smart key simulator
Main steps:
1.Backup IMMO data
2.Generate emulator key
Procedures:
1.Backup IMMO data
Connect the corresponding XTOOL device with vehicle
Select Diagnosis-> Immobilization-> Toyota->All smart key lost-> Read immobilizer data
Follow the prompt to press the start button once
Read immo data and then backup
2.Generate emulator key
Enter Generate emulator key menu
Make sure connect the network to the device
Select the backup immobilizer file
Note: if there is no backup, please operate the “Backup immobilizer data” first
Select the corresponding file and identify key type
Connect the KC100 adapter with X100 PAD2 tablet
Activate KC100 automatically
Input KS-01 emulator smart card into KC100
Generate emulator successfully
Then you can follow the instructions to add new key
XTOOL KS-01 Toyota Lexus smart key simulator:
http://www.obdiitool.co.uk/wholesale/xtool-ks-01-toyota-key-emulator.html
