How to clone BMW 7-dual-clutch (TEMIC DKG) Gearbox by Yanhua ACDP with Mini ACDP Module 19 without soldering? Check the step-by-step guide as below.
The operation guide:
Connect Mini ACDP, Yanhua ACDP module 9 and gearbox properly as below
Run Mini ACDP APP
Go to BMW -> EGS -> DKG Clone (Supports E /F chassis)-> DKG436_Gen2 (TC1784)
Step 1: Identify
Start connecting devices, testing network and loading hardware program
Make sure Mini ACDP and the gearbox have been connected properly
During the read/write data process, it is forbidden to unplug or plug the device and keep the device connected to internet.
The system info has been identified.
The data file will backup automatically
Step 2: Full Backup Data
It will read the system info again and wait about 40s to read chip data.
Then go to save the chip data file
Step 3: Full Write Data
Disconnect Mini ACDP module 19 and the original gearbox, then connect it to the new gearbox
Select “Full Write Data”
Read out the new chip data successfully
Select the original chip data file to write in
Write chip data successfully
Done!
Besides BMW 7-dual-clutch (TEMIC DKG), Mini ACDP with module 19 also can clone gearbox for all ZF 8HP & BMW 7- GETRAG 7DCT, Mercedes-Benz 9GT (VGS-NAG3), VW/Audi DQ380/DQ381 0DE, etc.
Reference: How to Use Yanhua Mini ACDP to Clone SH725XX Gearbox No Soldering?
