OBDSTAR X300 PRO4 Smart 453 Add Key & AKL: Confirmed
Car Key Programmer / October 28, 2021

OBDSTAR X300 PRO4 is verified to program key for smart 453 (add key & AKL).   OBDSTAR X300 PRO4 Smart 453 key add (by working together with obdstar P001 Adapter): confirmed Please directly add key by following the on-screen guide (PS: it is not in the Mercedes Benz menu) Look at X300 PRO4 Smart function list:   OBDSTAR X300 PRO 4 Smart V31.22 immo upgrade: all key lost for Smart 453 (all by OBD). PS: it is relatively high risk when all keys lost, if any risk, please follow the device prompt to do.   OBDSTAR X300 PRO4 tech support: https://www.obdiitool.co.uk/.

Obdstar X300 DP Plus Program Renault Logan 2018 AKL Success
Car Key Programmer / October 27, 2021

Obdstar X300 DP Plus can support to program Renault Logan 2018 all keys lost via OBD successfully. Follow the operations below to learn how it works. Another good news, buy X300 DP Plus now can get 2 free gifts: Renault Converter plus FCA 12+8 Adapter.   How to program Renault Logan 2018 AKL with X300 DP Plus? Read Info Plug connector into OBD2 port, press IMMO >> Renault >> Renault V30.99 >> Program keys >> Logan >> 2013- >> Type 2 >> All keys lost >> Read D Flash   Read the caution carefully, then press “Enter” to continue.   Switch ignition on. It’ll read the info automatically… Enter a filename to save once reading completed.   Program Keys Program keys >> Enter Please ensure the internet connection is normal.   Connect the OBDII-16 and converter at the same time, otherwise make the dealer key failed! If there is no converter, please refer to the help instructions!   Select the D Flash saved just now. And preload the key.   Do you have an original key? Enter   All existing keys of the current vehicle will be erased. If you need to keep the currently existing key, reprogram it. Maximum…

Autel IM608 Jaguar XF SV8 2011 Smart Remote Add by OBD
Car Key Programmer / October 21, 2021

Autel MaxiIM IM608 test report: add smart remote chip 46 433MHZ for aguar XF SV8 year 2011 via OBD.   Let’s go to add smart remote Jaguar XF SV8 via Autel IM608:   Turn ignition switch on. On Autel IM608 tablet, select “Jaguar” and then “Automatic selection”.   Reading VIN, after the VIN number is found, press [OK].   Confirm vehicle information: Jaguar XF 2008-2011 smart remote.   Select “Immo status scan”.   Press Start Button.   Immo status scan… and have key number:2 Next is to select “Immo matching -> Add smart key”. Press Start button again.   Position the learning smart key near the gear selector, and turn on the hazard warning lamp. Turn ignition off. Was the ignition automatically turn on? click on “Yes”.   Number of learned key: 2, click on “OK”. Would you like to learn new smart keys? click on “Yes”. Put new learning smart key on hand.   Press Unlock button of the smart key to be learned 1s with 5s, if the vehicle does not respond, a few more times. Establishing vehicle communication…   Learning successful, click on “Ok”.   Try to IMMO status scan again. Turn ignition on. Alright, Key number…

Solved! Yanhua Mini ACDP “WIFI Connection Failed” Issue
Car Key Programmer / October 20, 2021

Problem My Yanhua Mini ACDP WIFI connection is normal before. I haven’t used it for 3 weeks. Now it’s unable to connect after iOS system upgrade.   It prompts “When the configuration is unsuccessful, please check whether the connection WIFI and the input password are correct, and long press the reset button on the Mini ACDP device to wait for reset.” “WIFI connection failed”.   I’m sure the WIFI details are all correct, it can’t find the device and the status is unbound. What’s the problem? Please help.   Solution Change the WIFI password to a short and simple code. Go to “Setting >> Initial use settings” to reconnect the WIFI once.   Updates Thanks to www.obdiitool.co.uk, the Mini ACDP can be bound now. WIFI connection problem was solved!  

Is Possible Clone MD1CS006 Renault with Hexprog?
Car ECU Programmer / October 13, 2021

Is it possible clone md1cs006 Renault with Microtronik HexTag Programmer?   Yes its supported for read and write. Please check the supported list from below table:   Moreover, Microtronik HexTag can read and write more ECU including: Abarth , Alfa Romeo, Alpina, Aston Martin, Audi, Baic, Bentley, BMW, Buick, Chery, Chevrolet, Chrysler, Citroen, Cupra, Dacia, Daewoo, Dodge, Dongfeng, Donkervoort, Effedi, Ferrari, Fiat, Ford, Geely, Holden, Honda, Hyundai, Infiniti, Isuzi, Jaguar,Jeep, JMC, Kia, Lamborghini, Lancia, Landrover, Lincoln, Maserati, Mazda, McLaren, Mercedes Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rolls Royce, Saab, Saic, Saturn, Seat, Skoda, Smart, Subaru, Suzuki, Toyota, Vauxhall, VW, Volvo etc.   Please view Microtronik HexTag ECU tuning list from the below link: https://www.obdiitool.co.uk/upload/pro/21101416341931361730.pdf   Alright, order Microtronik HexTag Programmer from https://www.obdiitool.co.uk/wholesale/hextag-programmer-with-bdm-functions.html.

Launch X431 PAD V Clear DTC 2806 for Benz C200 (W204)
Car Diagnostic Tool / October 13, 2021

This is using Launch X431 PAD V to solve fault code 2806 for a Mercedes Benz C200(W204) after new TCM module replacement. The process requires to perform teach-In of drive authorization system & teach-in selection range sensor. Can be done on X431 PRO3 V4.0, X431 PRO V4.0, X431 PAD VII as well.   Note: It only works with un-authorization or new control module.   After TCM programming was done, use X431 PAD V to do a full diagnose. There’s still a fault code: 2806 – component “Y3/8s1(selection range sensor)” was not taught in.   How to do  “Teach-In of drive authorization system”? Go to Special function >> Teach-in processes >> Teach-In of drive authorization system >> OK >> OK >> Yes   Do you want to deactivate the transport protection? Yes   The control unit lock of control unit “ETC(EGS)” is released. Do you want to personalize control unit “ETC(EGS)”? Yes   Do you want to activate control unit “ETC(EGS)”? Yes >> Yes   Control unit “ETC(EGS)” is firmly assigned. To the vehicle and can no longer be personalized.   Return back to double check. As we can see, the actual values all have changed from NO to YES.   How…

How to Check & Email Repair History on Autel Diagnostic Tools?
Car Diagnostic Tool / October 3, 2021

Don’t know how to check & email Repair History on Autel diagnostic tools? No worries, follow the tips bellow to learn how to do.   The method is applied to most Autel diagnostic scanner such as Autel MaxiCOM MK808, MK908P, MK906BT, etc.     Method 1. Diagnostic/Service >> Select car model >> History >> Select one record >> Share button   Method 2. Shop manager >> Vehicle history >> Select one record >> Share button   Comply with 2 ways are allowed to view PDF, print, email or delete the repair history directly.   Hope this can help.   Obdiitool.co.uk is supplying series of Original Autel Tools. Any questions please let us know. https://www.obdiitool.co.uk/