Yanhua Digimaster III Mercedes Benz Odometer Correction Vehicle List
Mileage Programmer / August 23, 2019

Here comes the Yanhua Digimaster III Mercedes Benz odometer correction vehicle list. Some can be done via OBD, some need to remove to read memory, some requires to solder contacts. ICP, OBP, 9-PIN or 38-PIN adapter are required on specific models.   Digimaster 3 Benz car list: Car Model Method Adapter Storage Location CLS Class W219 -2011 Diagnostic CAN-OBD DM1 Cluster E class W212 -2011 V1 Diagnostic CAN-OBD DM1 Cluster E class W212 -2011 V2 Diagnostic CAN-OBD DM1 Cluster GL Class X164 v1 Diagnostic CAN-OBD DM1 Cluster GL Class X164 v2 Diagnostic CAN-OBD DM1 Cluster ML Class W164 V1 Diagnostic CAN-OBD DM1 Cluster ML Class W164 V2 Diagnostic CAN-OBD DM1 Cluster R Class W251 V1 Diagnostic CAN-OBD DM1 Cluster R Class W251 V2 Diagnostic CAN-OBD DM1 Cluster E-Coupe W207 Diagnostic CAN-OBD DM1 Cluster CLS Class W218 2011- Diagnostic CAN-OBD DM1 Cluster SLS Class R197 Diagnostic CAN-OBD DM1 Cluster SLK Class R171 Diagnostic CAN-OBD DM1 Cluster SL Class R230 Diagnostic CAN-OBD DM1 Cluster CLK Class W209 Diagnostic CAN-OBD DM1 Cluster E Class W211 Diagnostic CAN-OBD DM1 Cluster S Class W211 W216 Diagnostic CAN-OBD DM1 Cluster A Class V1- A160 Soldering Contacts OBP Cluster A Class V2-2005 3L40K Cluster: Memory Directly EIS:…

Digimaster 3 with Clip Adapter no Soldering is Required
Mileage Programmer / July 29, 2019

Question: I want to buy Digimaster 3 with clip adapter so no soldering is required   Answer: Yes, the clip adapter no soldering is required, comes with diagnostic function. It can work together with Yanhua Digimaster3, CKM100, Auto Digital Master etc.   With this clip adapter, all 8 feet IC chip doesn’t need to be removed and desoldered.   This is ICP tester:   How does ICP tester work together with Auto Digital Master or Digimaster III (D3)?   Follow the above image to connect Digimaster3 (or Auto Digital Master) to the ICP tester, open the D3 software. Please clip the chip well and note the chip pins (the red wire stands for the pin-1).   On the ICP tester, choose the corresponding chip type, click on “Test” to test if the pin is correct or not.   On the ICP tester display, you will see the diagnostic successful message. On the D3 or Auto Digital Master menu, select the corresponding chip type to read the data, try to reading for more than 2 times, compare if the data is the same, if yes means the data reading succeed.   www.obdiitool.co.uk