How to Refresh BMW F Series 6HP EGS with Yanhua Mini ACDP?

September 8, 2021

Yanhua Mini ACDP BMW + Module 11 can support to refresh BMW F series 6HP EGS on bench without soldering, this is a guide to show the operation process.

 

Procedure

 

  • Installation Preparation
  1. Prepare parts:

ACDP, OBP+ICP adapter, EGS interface board & EGS module.

 

  1. Connect EGS interface board & EGS module:

Aim the 6HP end label point on interface board with the EGS interface label point during installation.

 

  1. Short the jumper cap to the “CAN-R-Join”, connect all parts together.

Yanhua Mini Acdp Refresh Bmw 6hp Egs (1)

Yanhua Mini Acdp Refresh Bmw 6hp Egs (2)

  • Refresh BMW 6HP EGS

Open Mini ACDP app, click

BMW >> EGS refresh >> 6HP data refresh(supports F chassis) >> Data refresh >> OK

Yanhua Mini Acdp Refresh Bmw 6hp Egs (3)

Yanhua Mini Acdp Refresh Bmw 6hp Egs (4)

 

Check info, click “Continue”

It starts reading data…

 

OK >> Save >> OK

Data file saved success.

Read data is completed.

 

Click “Continue” to start write data.

 

Note:

Start writing data. It is forbidden to unplug the ACDP and keep steady power supply to ACDP during the process!

If the device disconnect, please unplug the ACDP after disconnection 15 mins, the ACDP will automatically complete the writing!

Click “OK” to continue.

Yanhua Mini Acdp Refresh Bmw 6hp Egs (5)

Yanhua Mini Acdp Refresh Bmw 6hp Egs (6)

It is writing data, please wait…

 

Data refresh is completed.

It’ll show the backup path automatically.

Done!

Yanhua Mini Acdp Refresh Bmw 6hp Egs (7)

 

Using Mini ACDP BMW Module 11 to refresh BMW 6HP EGS is simple and efficient without risk. No need soldering or complicated CAS3 platform.

https://www.obdiitool.co.uk/



无觅相关文章插件,快速提升流量