2018+ Jeep/Dodge/Chrysler FCA 12+8 Universal Adapter Manual

All 2018 FCA (FIAT/CHRYSLER/ALAFA ROMEO) vehicles are equipped with SGW safety gateway modules to prevent access to the vehicle from the OBD2 port via a non-original diagnostic scanner. The purpose of the FCA 12+ 8 Universal Adapter cable is to prevent attacks on the vehicle network via CAN bus.

What can you do using FCA 12+ 8 Universal Adapter?

1.OBD instrument mileage calibration, OBD anti-theft matching, read/erase fault code, identify VIN, etc.
2.Used with other diagnostic devices to read and clear fault code.

Available OBDSTAR devices: OBDSTAR X300DP or X300DP PLUS etc.

Available Autel Maxisys series scanners: MS906, MS906BT, MS906TS, MS908, MS908S, MS908S PRO, Maxisys Elite etc.

Available VIDENT scan tool: VIDENT iAuto708, VIDENT iAuto708 Lite, VIDENT iAuto708 Pro, VIDENT iAuto700, VIDENT iLink400, VIDENT iLink450 and VIDENT iSmart900, etc.
Available Foxwell scanner: Foxwell NT510 Elite, NT530, NT680. NT68O Pro, NT680 Elite, etc.

Here is the specific car models need FCA 12+8 Universal Adapter:

2018+ Jeep Renegade
2018+ Jeep Compass
2018+ Jeep Cherokee
2018+ Jeep Wrangler
2018+ Jeep Grand Cherokee
2018+ Dodge Ram
2018+ Dodge Durango
2018+ Dodge Journey
2018+ Dodge Charger
2018+ Dodge Challenger
2018+ Chrysler Pacifica
2018+ Chrysler 300

How to use FCA 12+8 Universal Adapter?
1.Locate and unplug the 12pin and 8PIN connectors of the SGW module.
2.Then connect the FCA 12+8 directly to the 12pin and 8pin (two connectors connected to the SGW) connector on the car.
3.At this point, normal communication with the car can be achieved.
Refer to the following connection.