OEM PDR Dent Puller Tools Kits for DIYer Guide

There are two new OEM brand PDR Dent Lifter Tools Kits have been released at obdiitool.co.uk, which will easily help DIYer or car owner to repair their car dents.

Oem Pdr Dent Puller Tools Kits Guide 1

 

Option 1: 81PCS PDR Dent Lifter Tools Kit Paintless Hail Repair Slide Hammer Puller Tab

Oem Pdr Dent Puller Tools Kits Guide 2

https://www.obdiitool.co.uk/wholesale/81pcs-pdr-dent-lifter-tools-kit.html

Price: only £38.00

It comes with the goods as below.

  • Glue Gun GT-10

Oem Pdr Dent Puller Tools Kits Guide 3

  • Dent Rubber Hammer with 9 pcs Tap Down Pen Tools

Oem Pdr Dent Puller Tools Kits Guide 4

  • Repairable Car Dent Types for 2 in 1 Dent puller+ for Dents Puller Repair Tool

Oem Pdr Dent Puller Tools Kits Guide 5

How to use 81PCS PDR Dent Lifter Tools Kit?

1.Confirm dent by line board

2.Glue Gun heat glue stick

3.Clean the dent with a clean rag

4.Adhibit Puller tab on the dent after 3-5min

5.Use 2-in-1 upgraded slide hammer

6.Use Dent lifter for small dents

7.Use another Dents Puller Repair Tool

8.Spray the alcohol on the residual glue and then clean it up with scraper

9.Repair car dents successfully

Oem Pdr Dent Puller Tools Kits Guide 6

 

Option 2: PDR Paintless Dent Repair Tools Dent Puller Bridge DIY Car Body Hail Removal Kit

Oem Pdr Dent Puller Tools Kits Guide 7

https://www.obdiitool.co.uk/wholesale/pdr-diy-dent-repair-kit.html

Price: only £18.00

It comes with fewer tools than option 1.

How to use Dent Repair Bridge Tool?

1.Clean the dent with a clean rag

2.Insert glue stick into the glue gun and charge it by 3-5 minutes

3.Apply hot melt glue on the tap with the glue gun

Note: remember to start from the center of the tap and in a circle inside and out, and make sure the glue is even and full on the tap.

4.Align the center point of tab with the dent center point, then quickly put the tab on the dent and slightly press it until the space between the tab and dent is 1 mm, and loosen your grip until it is fastened on the dent

5.It cools down with only a little temperature.

It has strongest viscosity, so you can check it with your hand.

Buckle the middle hole of the bridge with the rod of the tab after aimed at them, and put the nut on the connecting rob, and then spin the nut continually till repaired.

6.Spray the alcohol on the residual glue, and then clean it up with the scraper.

Oem Pdr Dent Puller Tools Kits Guide 8

 

In conclusion, both OEM PDR Dent Lifter Tools Kits are cheap with high quality, just choose the one depends on your actual need.

 

If you have any question about these car dents repair tools, please feel free to contact us.

www.obdiitool.co.uk