There is something wrong with Scania SDP3 software v2.44.1. When I install and run it for my scania VCI3 scanner, the following error is reported “Internal software fault in SDP3. If the fault recurs, send the log file SDP3Tool.log to Scania’s SDP3 department.”
Here is the solution I got from obdiitool.co.uk engineer:
You’d better uninstall the current software and install the newest software V2.46.1.
Scania SDP3 2.46.1 free download link:
No password! (Security unknown)
Size: 893.5 MB
2.on Chinese weiyun
Size: 1005.28 MB
Note: Contact us to get weiyun account to download as soon as possible.
Language supported: English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian and Chinese
Operating system: Windows 7 or Win10 32 bit/64 bit (recommend)
Besides that, they also offer me the related installation video.
It’s not difficult to install, just follow the video to operate step by step, and finally I install the new software successfully.
Here are the main steps:
Step 1: Copy and paste Scania SDP3 2.46.1 software folder to desktop
Step 2: Install Adobe Reader 9.2
Step 3: Run NDP462 setup as administrator and install Framework 4.6.2 setup
Step 4: Run Scania Diagnos & Programmer3 2.46.1.exe as administrator to install SDP3 2.46.1 setup
Step 5: Run Prerequistes.cmd as administrator to check operation is completed
Step 6: Restart computer
Step 7: Open software folder and FIX file to run Hardware ID Reader.exe
Copy and paste the ID to obdiitool.co.uk to get activation ID
Step 8: Merge registration key
Step 9: Open -install_cmd file on C:/Scania 2.46.1/FIX/x32
Note: It depends on the operating system.
Step 10: Connect Scania VCI3 interface with computer and install device driver software
Step 11: Restart computer
Step 12: Copy 2 files in C:/Scania 2.46.1/FIX/Fix 2.46.1 and replace that in C:/Program Files/Scania/SDP3 folder
Step 13: Run Time.exe in FIX folder as administrator and Crack SDP3
Step 14: Restart computer
Step 15: Run SDP3 software on desktop to update VCI
Step 16: Open SDP3 Configurator on desktop to select language you desired
Then the software is ready to use.
Many thanks to obdiitool.co.uk! Now my Scania SDP3 software works well!