Hook Iprog+ V76 programmer up the Toyota car, aiming to perform immobilizer work like key copy, key prepare, key unlocker etc. The test result is satisfied me, I tried Toyota smart key 94 copy and D4 copy, tried reset Smart key, Transponder etc.
Firstly, update Iprog+ V76 driver:
Open the CD.
Install “7z1900-32bit” (my computer is 32BIT).
Copy and paste ” iProg+_2019_00001″ to the desktop.
Right click on ” iProg+_2019_00001″, use “7-zip” to extract.
Have window message “Device (iProg+) driver software was not successfully installed“.
Right click on “Computer” -> “Manage” -> “Device Manager”;
Right click on “iProg universal programmer” and select “Update Driver software“.
Select “Browse my computer for driver software”
Select “Driver” folder”.
Click on “Install this driver software”.
Driver software was successfully updated.
Start to user Iprog+ clone V76 software, it lists several functions: Airbag, Car, Dashboard, EEPROM, MCU, others etc.
Click on “Car” and have many options incl. Car radio, DPF OFF, ECU, IMMO, Key, Mil to KM, PIN ABS, PIN Code Smartra 3, Pincode from the dump v1.0.3, Sensor, Speed Limit etc
iProg+ V76 key full functions:
Key Auto
Key Copy
Key Moto
Key prepare (Chery, Ford, Kawasaki, Lada, Mazda, Mitsubishi, Renault, Suzuki, Toyota, VAG, Yamaha)
Key trucks
Key unlocker (Honda, Hyundai, Kia, Ladak)
Click on “IMMO” -> “Key” ->”Key Copy” ->”Toyota” -> “Toyota Copy ID -94, D4.ipr”.
iProg+ V76 key prepare for Toyota ID67, ID97, D4.
Smart key New adapter:
Reset Smart 40-80 Key.ipr
Toyota 93c86 Smart Key. ipr
MB_ir:
Transponders:
Select “Hitag2”, then “pcf7936_eng.ipr”, then “Read all memory”.
As you can see, the software comes with guiding image, it will help user how to do specifically. So iProg+ pro is user-friendly, highly recommend it.
