Yanhua ACDP module 21 is newly designed for Volkswagen Audi DQ200 (0AM/0CW), DQ250 (02E/0D9), DL382 (0CK), VL381 (0AW) gearbox mileage correction. Working with Mini ACDP, it can quickly identify the gearbox model via OBD. Plug the special interface board in to the car to modify the mileage, no need to disassemble the TCM.
Something important to know:
The hardware configuration of ACDP module 21 is the same as module 13, the difference is module 13 adds a DL501 (0B5) interface board, and they support different functions.
If you have Module 13 for the VW Audi gearbox clone, just pay for a software license to add the gearbox mileage correction function. Don’t need to buy interface boards again.
If you do not purchase module 13, and only want to change the mileage of the VAG gearbox and do not want to clone the gearbox for VAG, just purchase Module 21.
1.ACDP Module 21 Configuration List:
Item NO. | Adapters/Parts | Pictures | Quantity | Adapters/Parts Functions |
1 | DL382 interface board | 1PC | Applicable to connect VM/Audi DL382 gearbox | |
2 | DQ200 interface board | 1PC | Applicable to connect VM/Audi DQ200 gearbox | |
3 | DQ250 interface board | 1PC | Applicable to connect VM/Audi DQ250 gearbox | |
4 | VL381 interface board | 1PC | Applicable to connect VM/Audi VL381 gearbox |
2.Mini ACDP with module 21, VW Audi gearbox connection diagrams:
VW AUDI DL382 (0CK)
VW AUDI DQ200 (0AM/0CW)
VW AUDI DQ250 (02E/0D9)
VW AUDI VL381 (0AW)
Connection steps:
Step 1: Prepare ACDP, OBP+ICP adapter, interface board and VW/AUDI gearbox.
Step 2: Connect the corresponding interface board correctly to the gearbox
Step 3: Connect the CAN resistor (Short the jumper cap to the ‘CAN-R-Join’ port according to the marked position)
Step 4: Connect ACDP, OBP+ICP adapter, interface board and VW/AUDI gearbox.
3.Operation guide on Mini ACDP
Open Mini ACDP APP
- Select VW>> Gearbox mileage correction>> VW or Audi>> the corresponding gearbox module supported>> Identify>> Mileage correction (auto mode) or Mileage correction (single step mode)
General speaking, Mileage correction (auto mode) is recommended to use. It supports EEPROM reading, mileage adjustment and EEPROM writing by Mini ACDP.
Mileage correction (single step mode) is recommended only in the following situations.
- Read EEPROM by other device, and write EEPROM by ACDP
- Read EEPROM by ACDP, and don’t want to write EEPROM data
Yanhua ACDP module 21 is available at obdiitool.co.uk now.
https://www.obdiitool.co.uk/wholesale/yanhua-mini-acdp-module-21.html