Recently, one customer used Toyota G & H OBD remote key programmer to do a key remote on his car, but it failed to use. He wants to see if this device could indeed support the function or he did it in the incorrect method.
In fact, just like its name, Toyota G key programmer only can program both Toyota G and Toyota H chip vehicles via OBD2 port. It applies to 4D67, 68, and 72(G), tests on the 2015 Camry and works well. (Only supports adding new keys, not all keys lost).
Please kindly notice:
- If your car is matched manually, then the key you added by this key programmer, only can start the car. For remote, you need to match and set up based on the original factory.
- If your car is matched automatically, for the new key you added, it not only can start the key but also has a remote function.
Guide to add remote control on Toyota G& H chip vehicle:
Step 1: Get in the car and close the door. Insert the original key and turn the key on, insert the TOYOTA G and H chip OBD remote key programming device into OBD.
Step 2: After the sound (Dee-), it will start to add the remote control.
Step 3: After the sound (Dee- Dee-), open the door. When hearing the sound blaring, press the‘ lock & unlock’ key at the same time, and press the’ lock’ key.
If the blaring ends, it’s OK.
Note: the switch is on the right. (Add remote control)
For more info, please refer to https://www.obdiitool.co.uk/wholesale/obd-remote-key-programming-device-toyota-g-h-chip.html
