Xhorse Condor XC-Mini Plus User Manual: Installation, Update online

This article is available with cutter/clamp installation and online update instructions on Xhorse Condor XC- Mini Plus key cutting machine.

 

Installation instruction 

-How to install cutter on Condor XC-Mini ii

-How to uninstall cutter on Condor XC-Mini ii

-How to install clamp on Condor XC-Mini ii

 

Online update 

 

-How to update on Xhorse APP

 

In detail…

 

Installation instruction

How to install cutter on Condor XC-Mini ii?

xhorse-condor-xc-mini-plus-installation-online-update-1

 

Step 1: Put the cutter into the mounting hole and make sure the cutter goes to the limit of top

Step 2: Use the cutter tightening wrench to clockwise fix the cutter.

 

How to uninstall cutter on Condor XC-Mini II?

xhorse-condor-xc-mini-plus-installation-online-update-2

Step 1: Counter-clockwise unscrew the cutter manually

Step 2: Take the cutter off when it is loose

 

How to install clamp on Condor Mini Plus?

xhorse-condor-xc-mini-plus-installation-online-update-3

Step 1: Loosening the clamp tightening wrench by turning it counter-clockwise to the left

Step 2: Select the correct clamp and slide in the clamp to the clamp holder and push it to the limit of left

Step 3: After the clamp is put in the clamp platform, turn the clamp tightening wrench clockwise for fix it

 

XC-Mini Plus clamps display

 

Clamp M1 (Standard fixture)

xhorse-condor-xc-mini-plus-installation-online-update-4

 

Clamp M2 (Standard fixture)

xhorse-condor-xc-mini-plus-installation-online-update-5

 

Clamp M3 (Optional Clamp)

xhorse-condor-xc-mini-plus-installation-online-update-6

 

Clamp M4 (Optional Clamp)

xhorse-condor-xc-mini-plus-installation-online-update-7

 

Clamp M2 sides selection

xhorse-condor-xc-mini-plus-installation-online-update-8

 

Clamp M4 instruction

xhorse-condor-xc-mini-plus-installation-online-update-9

Clamp M4 for household keys, mainly support standard single and double sided keys, also for crucifix keys, example as follows:

 

Sided keys

 

Crucifix keys

xhorse-condor-xc-mini-plus-installation-online-update-11

 

Online update

There are 3 ways to get “’Upgrade kit” file for firmware update

Method 1: Contact your distributor ask for the software

Method 2: Contact Xhorse technical support skype: Live: condor_keymachine@hotmail.com

Method 3: Scan the QR code to download and install Xhorse APP

xhorse-condor-xc-mini-plus-installation-online-update-12

Step 1: Unzip the “Upgrade kit” file after the file has been downloaded

xhorse-condor-xc-mini-plus-installation-online-update-13

Step 2: Run “Upgrade Kit.exe” and connect the machine with the pc

Do not turn off the machine during update process and also the upgrade kit software will update automatically

xhorse-condor-xc-mini-plus-installation-online-update-14

Step 3: Open the file of ‘Driver’ from those decompressed files

Choose a relatively new driver to install

 

Please kindly notice:

If the computer still cannot recognize the machine after the installation of the driver, it is advisable to change to another driver.

If all the drivers fail, please contact your distributor or technical support from the manufacturer.

xhorse-condor-xc-mini-plus-installation-online-update-15

Step 4: After the machine is successfully communicated with the computer

Read the serial number, then select the XCMINIPLUS and click to update

 

Note: Please keep the machine connected to the computer by USB during the update.

xhorse-condor-xc-mini-plus-installation-online-update-16

Xhorse Condor XC-Mini Plus automatic key cutting machine:

http://www.obdiitool.co.uk/wholesale/xhorse-condor-xc-mini-plus-key-cutting-machine.html

That’s all. Hope it helps!